- Domů
- Produkty
- Nábytek, Řešení pro kuchyně & obývací pokoje
- Stolová kování, Nohy, Nohy a kolečka
- Stolová kování
- Sklopné kování,Pro vkládací desku, pro stoly s otevřeným rámem stolu

Sklopné kování,Pro vkládací desku, pro stoly s otevřeným rámem stolu





- Stoly s rámovou konstrukcí nebo bez ní
- Kování pro výsuvné stoly s rámovou konstrukcí
- One-piece table base
- Separate table tops and extension leaves with table top connecting fittings and sleeves
- Extension leaves can be fitted to the table frame with a folding fitting.
- Pull out tables with closed frame can be equipped with a separated, hinged middle section (folding fitting) instead of an extension leaf.The folding fitting is required in addition to the pull out table fitting and must be ordered separately.
- Installation length L of pull out table fitting = approx. length of frame/base or approx. 2/3 of table Ø or table length without extension leaves
- Separate extension leaf (separate storage)
- Separate extension leaf (integrated in table)
- Folding fitting (integrated in table)
- Open table frame
- Folding fitting (integrated in table)
- Folding fitting (integrated in table, "drawer function")
Table with or without frame
Table bases with and without frames are constructed and function in different ways.
Table with frame = one-piece table base | Table without frame = multi-piece table base | ||
![]() | The separable table tops are pushed apart. The table base remains unchanged. | ![]() | The separable table bases with fixed table top are pushed apart. |
![]() | ![]() |
Following applies for both tables with frame and without frame:
Extension leaf
Min. width 400 mm, Standard 500 mm, Comfort 600 mm, one extension leaf provides additional seating for 2 people.
Synchronous
Only one table side must be pulled out. The opposite side of the table is then extended automatically.
Asynchronous
Both table sides must be pulled out separately.
Without locking mechanism
For locking the pull out table fitting in extended position additional fittings are required (table top swivel bolts, locking hooks or spring clips).
With locking mechanism
The locking mechanism is integrated in the pull out table fitting. No further fittings are required.
Pull out table fittings for tables with frame
Construction
Notes on construction
Note on choice of pull out table fitting
![]() |
ⓐ= width of extension leaf ⓛ= installation length of pull out table fitting ⓑ= total extension length of pull out table fitting ⓔ= opening for extension leaf |
Please note:
If the installation length L is less than approx. length of frame/base or table Ø, this may lead to malfunction or sagging of the table top.
Types of tables with frame
open table frame | Closedtable frame | Separate extension leaf on end side | front extension | Front extension |
![]() Separate extension leaf | ![]() Folding fitting | ![]() | ![]() | ![]() |
Note: Folding fitting must be ordered separately in addition to the pull out table fitting.
Zobrazit filtr
Dokončit Váš výběr

Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263 Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com |

Sklopné kování,Pro vkládací desku, pro stoly s otevřeným rámem stolu
- Viz vysvětlivky
ⓐ úchyt desky
ⓑ spojovací kování pro stolové desky
ⓒ upínací háček 52 mm
ⓓ upínací háček 53 mm
ⓔ otočná pojistka 48 mm
ⓕ otočná pojistka 60 mm
ⓖ petlice (případně ⓒ+ⓓ, ⓔ,ⓕ nebo ⓗ)
ⓗ petlice se zamykacím mechanismem
ⓘ otočné ložisko
ⓙ nosný úhelník
ⓚ závěs pro sklopný stůl
ⓛ závěs pro sklopný stůl





Upozornění: Obrázek příp. ukazuje podobný výrobek
Upozornění
Pro vložení výrobku do košíku ho vyberte pomocí znaků nebo tabulky výrobků.